1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179 | Trustwave's SpiderLabs Security Advisory TWSL2010-003:
Unauthorized access to root NFS export on EMC Celerra Network Attached
Storage
(NAS) appliance
https://www.trustwave.com/spiderlabs/advisories/TWSL2010-003.txt
Published: 2010-07-29 Version: 1.0
Vendor: EMC (http://www.emc.com)
Product: Celerra Unified Storage products
(http://www.emc.com/products/family/celerra-family.htm)
Version(s) affected: All
Product Description:
The Celerra Unified Storage Platform provides Network Attached Storage (NAS)
services through a combination of server appliances and software modules.
Credit: Steve Ocepek of Trustwave's SpiderLabs
CVE: CVE-2010-2860
Finding:
The Celerra appliance's NFS server freely exports its "/" file system and
enforces access using a factory-defined list of authorized IP addresses.
The
addresses found on a recent model are listed in the showmount example below,
however this list may differ depending on product version. The IP addresses
are intended for communication internal to the appliance, but are still
accepted from external sources. An attacker can mount this file system by
spoofing an authorized IP address.
The NFS showmount command can be used to obtain a list of the IP addresses:
# showmount -e <Celerra IP address>
Export list for <Celerra IP address>:
/ 128.221.253.101,128.221.252.101,128.221.253.100,128.221.252.100
Because the appliance's NFS server does not enable the "rootsquash" feature,
full access to the file system is possible by mounting the export using root
(UID 0).
Fully spoofing the source IP address (for sending and receiving packets)
will
usually require access to the local subnet or the ability to exploit some
other network infrastructure vulnerability. On Linux, local IP address
spoofing can be accomplished by creating an alias interface and using the
"ip route" command to set the source IP accordingly.
# ifconfig eth0:0 128.221.253.101
# ip route add <Celerra IP address> dev eth0 src 128.221.253.101
# mkdir nfs
# mount <Celerra IP address>:/ nfs
The flaw allows unauthorized access to files contained on the system,
including all CIFS shares and iSCSI mounted drives. The "/" path does not
correspond to the true root of the file system -- only the root of the user
data directory is exposed.
Vendor Response:
The vendor has acknowledged this issue and issued the following workaround.
Vendor has also published a knowledgebase article about the issue and
mitigation so support can help any customers who call in with this issue
until
a permanent fix from EMC is available.
Vendor estimated date for a code fix is Q3 2010.
Remediation Steps:
The following recommendations were provided by the vendor.
1. Hide NFS exports and show it only based on the configured access. Setting
forceFullShowmount param to 0 (default is 1) will hide the "/" from the list
since only Control Station have access to it for administration purpose:
[root () virgil slot_3]# server_param server_3 -f mount -info
forceFullShowmount
server_3 :
name = forceFullShowmount
facility_name = mount
default_value = 1
current_value = 1
configured_value =
user_action = none
change_effective = immediate
range = (0,1)
description = Forces response to showmount requests to fully
populate response.
[root () virgil slot_3]# server_param server_3 -f mount -modify \
forceFullShowmount -value 0
server_3 : done
After the above change, client will see only the shares he have permissions
to
access to:
/usr/sbin/showmount -e 172.24.97.3
Export list for 172.24.97.3:
/fs1 (everyone)
2. Change default IP addresses (during install or after) for internal
network
along with first step above to further minimize the exploitability.
Product team has provided additional mitigations steps that can be
implemented
by the customers to reduce the severity of exploitation of a vulnerability:
1. Create IP-based access rules on the network equipment rejecting traffic
for
IP addresses belonging to internal Celerra network which do have own switch
for that purpose. These addresses are listed in the /etc/hosts file of the
Celerra Control Station.
2. Configure firewall(s) between Data Movers and NFS clients to reject
traffic
for IP addresses belonging to the internal Celerra network.
3. Hide NFS exports and show it only based on the configured access. Setting
forceFullShowmount param to 0 (default is 1) will hide the ³/² from the list
since only Control Station have access to it for administration purpose.
4. Disable IP reflect
Vendor Communication Timeline:
05/07/10 - Initial communication
05/10/10 - Vulnerability details provided
05/18/10 - Vulnerability acknowledged, workaround and timeline provided
07/27/10 - Additional workaround details provided
Revision History:
1.0 Initial publication
About Trustwave:
Trustwave is the leading provider of on-demand and subscription-based
information security and payment card industry compliance management
solutions
to businesses and government entities throughout the world. For
organizations
faced with today's challenging data security and compliance environment,
Trustwave provides a unique approach with comprehensive solutions that
include
its flagship TrustKeeper compliance management software and other
proprietary
security solutions. Trustwave has helped thousands of organizations--ranging
from Fortune 500 businesses and large financial institutions to small and
medium-sized retailers--manage compliance and secure their network
infrastructure, data communications and critical information assets.
Trustwave
is headquartered in Chicago with offices throughout North America,
South America, Europe, Africa, China and Australia. For more information,
visit https://www.trustwave.com
About Trustwave's SpiderLabs:
SpiderLabs is the advance security team at Trustwave responsible for
incident
response and forensics, ethical hacking and application security tests for
Trustwave's clients. SpiderLabs has responded to hundreds of security
incidents, performed thousands of ethical hacking exercises and tested the
security of hundreds of business applications for Fortune 500 organizations.
For more information visit https://www.trustwave.com/spiderlabs
Disclaimer:
The information provided in this advisory is provided "as is" without
warranty
of any kind. Trustwave disclaims all warranties, either express or implied,
including the warranties of merchantability and fitness for a particular
purpose. In no event shall Trustwave or its suppliers be liable for any
damages whatsoever including direct, indirect, incidental, consequential,
loss of business profits or special damages, even if Trustwave or its
suppliers have been advised of the possibility of such damages. Some states
do not allow the exclusion or limitation of liability for consequential or
incidental damages so the foregoing limitation may not apply.
|
